In this step, we clean up the LED and install it in the pass body. If you plan on making your pass "work", you'll do different stuff on this step. I am building a non functioning pass.

	This is the LED that we'll be working with.
	For this step, we need the LED and some wire strippers
	Clip off the posts on the back of the LED using the wire strippers.
	File down the stubs until they are flush with the rest of the LED. If you want to get really creative, you can also sand off the text printed on the side of the LED.
	Use your favorite epoxy to adhere the led in place. Place a dab of epoxy into the pass body, then slide the LED in. Don't put glue on the LED, as you run the risk of getting it all over the face of the pass. All done!